強力型半襯硬密封陶瓷球閥
(Ceramic Half-lined Hard-sealing valve)
規格及連接尺寸請參考全襯硬密封陶瓷球閥數據表
Connection Dimensions are the Same With the Ceramic Fully-lined Hard-sealing Ball Valve(Page08)
特點（Features）
閥門殼體經過硬化加固加厚處理，（超過國家標準GB、JB,美標ANSI的標準數據要求）。分三段二段結構。襯閥門的使用要求制造。
殼體加強，閥門不會因重力而扭曲鎖死。（陶瓷閥芯內部要求精度公差超過國家標準的精確度）。閥門流通順滑，特別為含雜質纖維、粘糊將料、高度顆粒介質而設計。適用于硅粉、鎂粉、石灰的輸送排放。產品以國標，美標為主。也可依客戶需要制造非標產品。
The valve shell is thickened and strengthened(higher than GB,JB,ANSI) And it can be made into or three sections if necessary. As a result ,the valve will not be distorted and locked because of gravity
The high-strength hard seal ceramic ball valve is designed for the media which contains fiber, slurry and high-hardness particle, applicable to pipe-line transportation and emission of Silicon powder ,magnesium powder and lime.
The ceramic ball and seat inside are hard sealed so that the valve can be zero leakage ,economical ,practical and earmarked for foreign trade.
材質表
序號NO | 名稱Part name | 材料Material | 序號NO | 名稱Part name | 材料Material |
01 | 閥體Body | SS304、A105N | 11 | 閥桿Stem | SS316 |
02 | 閥蓋Body cap | SS304、A105N | 12 | 填料Packing | PTFE/Graphit |
03 | 閥球Ball | 結構陶瓷Ceramics | 13 | 填料壓套Gland | SS 304 |
04 | 閥座Seat | 結構陶瓷Ceramics | 14 | 碟型彈簧Disc spring | SS 304 |
05 | O型圈O-ring | 丁腈 硅膠 氟膠NBR/VMQ/FKM | 15 | 壓板Glａnd flange | SS 304 |
06 | O型圈O-ring | 丁腈 硅膠 氟膠NBR/VMQ/FKM | 16 | 壓板螺栓Bolt | SS 304 |
07 | 體蓋螺栓Cap bolt | A193-B7/SS304 | 17 | 限位片Stopper | SS 304 |
08 | 體蓋螺帽Cap nut | A193-B7/SS304 | 18 | 卡簧Circlip | SS 304 |
09 | 墊片Washer | SS 316 | 19 | 套筒手柄Handle lever | SS 304 |
10 | 軸套Stem sleeve | SS 304 | 20 | 手柄螺栓Hex bolt | SS 304 |
轉矩及執行機構連接尺（Torque Values& Actuator mounting kits dimensions）
規格/SIZE | 法蘭型號 Flange type | H | H1 | □AхA | ΦB | ΦC | ΦD | EхE | |
DN | NPS | ||||||||
DN15 | 1/2″ | F05 | 89 | 12 | 9х9 | Φ23 | Φ50 | Φ8 | 66х66 |
DN20 | 3/4″ | F05 | 94 | 12 | 9х9 | Φ23 | Φ50 | Φ8 | 66х66 |
DN25 | 1″ | F05 | 94 | 12 | 9х9 | Φ23 | Φ50 | Φ8 | 66х66 |
DN32 | 1-1/4″ | F05 | 102.5 | 14 | 11х11 | Φ28 | Φ50 | Φ8 | 66х66 |
DN40 | 1-1/2″ | F05 | 107.5 | 15 | 11х11 | Φ28 | Φ50 | Φ8 | 66х66 |
DN50 | 2″ | F07 | 135 | 15 | 14х14 | Φ46 | Φ70 | Φ10 | 99х99 |
DN65 | 2-1/2″ | F07 | 145.8 | 18 | 19х19 | Φ46 | Φ70 | Φ10 | 99х99 |
DN80 | 3″ | F07 | 160 | 20 | 19х19 | Φ46 | Φ70 | Φ10 | 99х99 |
DN100 | 4″ | F10 | 196.5 | 22 | 22х22 | Φ60 | Φ102 | Φ12 | 120х120 |
DN125 | 5″ | F10 | 213.3 | 27 | 27х27 | Φ60 | Φ102 | Φ12 | 120х120 |
DN150 | 6″ | F10 | 235 | 27 | 27х27 | Φ60 | Φ102 | Φ12 | 120х120 |
壓力實驗（Pressure Testing）
規格 | DN | DN15 | DN20 | DN25 | DN32 | DN40 | DN50 | DN65 |
NPS | 1/2″ | 3/4″ | 1″ | 1-1/4″ | 1-1/2″ | 2″ | 2-1/2″ | |
扭矩Torche Values/N.M | 空轉（N.M）ldling | 5 | 10 | 10 | 15 | 15 | 25 | 30 |
氣壓0.6Mpa | 10 | 15 | 15 | 10 | 20 | 30 | 55 | |
規格 | DN | DN80 | DN100 | DN125″ | DN150 | |||
NPS | 3″ | 4″ | 5″ | 6″ | ||||
扭矩Torche Values/N.M | 空轉（N.M）ldling | 35 | 45 | 45 | 60 | |||
氣壓0.6Mpa | 70 | 90 | 100 | 100 |
以上數據是在實驗條件下測得，可能與閥門實際使用工況有所不同，僅供參考，建議與我司聯系以應用正確的執行機構。
The date shown above was acquired under test conditions that may be very different form the actual site conditions, and for your reference ,it is recommended to contact us to help you select the suitable actuator.
