L C定量脫壓式全封閉稀油分配器/定量全封閉容積式稀油分配器返回列表頁

舉報 評價

參考價

面議

具體成交價以合同協議為準

產品型號

品牌

廠商性質其他

所在地

在線詢價 收藏產品查看聯系電話

更新時間：2023-04-06 09:45:18瀏覽次數：344次

聯系我時，請告知來自紡織服裝機械網

同類優質產品更多>

產品分類品牌分類

角度傳感器/傾角傳感器

磁致伸縮位移傳感器

查看更多分類

產品簡介

LC定量脫壓式全封閉稀油分配器/定量全封閉容積式稀油分配器,增強了分配器使用壽命，使設備更加健康.

詳情介紹

L C定量脫壓式全封閉稀油分配器/定量全封閉容積式稀油分配器

工作原理
A：計量活塞動作行程
B ：傘形雙向閥動作行程見上圖，從潤滑泵壓送的油從主管A注入，并將傘形雙向閥B向推開流入，通過通路C壓送活塞室到F內。受壓力油作用下計量活塞向下動作彈簧G被壓縮蓄油，從而進行計量蓄油，當主管A內油壓被釋放<即卸壓>，傘形閥B因壓力差而動作，同時開啟吐出口E，于是活室內計量蓄油通過吐出口E送入油管H而將油輸送到潤滑點，信號銷I當計量蓄油時突出．而供油給潤滑點時縮回，從而確認分配動作完成情況。

A: metering piston action schedule
B: the action trip of the umbrella type two-way valve is shown in the figure above. The oil from the lubrication pump is injected from the director A, and the umbrella-type two-way valve B is pushed open. Push the piston chamber to F through the channel C.The piston moves downward under the action of pressure oil.The spring G is compressed.Thus the measurement of oil storage.When the oil pressure is released in charge of A(the discharge pressure). The umbrella valve B moves with pressure difference. At the same time, it opens the outlet E, so the living room measures the oil storage.The oil is transported to the lubrication point by outlet E to the pipe H, and the signal
pin I is prominent when measuring the oil storage. When the oil is supplied to the lubrication point, it is retracted to confirm the completion of the distribution.