砌墻磚抗壓強度試樣制攪拌機是檢測儀器，適用于工業與民用建筑砌墻磚抗壓強度制備用試驗設備。使用前務必仔細閱讀說明書。并由**實驗人員操作，以避免操作不當引起的傷害。如需了解更多資料請與我公司客服人員聯系。
The compressive strength mixer for masonry bricks is a testing instrument, which is suitable for testing equipment for the compressive strength of industrial and civil building masonry bricks. Be sure to read the instructions carefully before use. It is operated by ** experimental personnel to avoid injury caused by improper operation. For more information, please contact our customer service staff.
砌墻磚抗壓強度試樣制攪拌機根據GB/T 25044-2012《砌墻磚抗壓強度試樣制備設備通用要求》技術規程設計生產的新型強度試驗攪拌設備。是拌制凈漿的專用設備，控制系統采用程控變頻技術，具備轉速連續可調、數字顯示、外型美觀、操作方便等優點。
The compressive strength mixer for masonry bricks is a new type of strength testing mixing equipment designed and manufactured in accordance with the technical regulations of GB / T 25044-2012 "General requirements for compressive strength sample preparation equipment for masonry bricks". It is a special equipment for mixing pure pulp. The control system uses program-controlled frequency conversion technology, which has the advantages of continuously adjustable speed, digital display, beautiful appearance and convenient operation.
砌墻磚抗壓強度試樣制攪拌機技術參數：
★利用攪拌臂與攪拌鍋之間的相對運動砌墻磚抗壓強度試驗用漿攪拌的裝置。
★額定電壓：380V
★攪拌鍋額定容量:23.6L
★攪拌容量；20L
★額定頻率：50HZ
★額定功率：2.5KW
★攪拌轉速：（分為三個檔）I 檔 45r/min II檔 90R/min III檔 150r/min
Technical parameters of compressive strength mixer for masonry bricks:
★ It is a device for stirring mortar for the compressive strength test of wall bricks by using the relative movement between the stirring arm and the stirring pot.
★ Rated voltage: 380V
★ Stirred pot capacity: 23.6L
★ Stirring capacity; 20L
★ Rated frequency: 50HZ
★ Rated power: 2.5KW
★ Stirring speed: (divided into three gears) I gear 45r / min II gear 90R / min III gear 150r / min
砌墻磚抗壓強度試樣制攪拌機操作過程:
使用前把攪拌機放到水平的工作臺上面，把攪拌機與操作柜電源連接好,然后按下啟動開關再慢慢旋轉調速開關，攪拌開始。
Operation process of compressive strength mixer for masonry bricks:
Before use, place the mixer on a horizontal workbench, connect the mixer to the power supply of the operation cabinet, then press the start switch and then slowly rotate the speed switch to start mixing.
砌墻磚抗壓強度試樣制攪拌機注意事項：
1、使用前要仔細閱讀說明書，嚴格按操作規程使用。
2、開機前必須接好接地線裝置，工作中A隨意拆除，以免發生觸電。
3、機器工作時，手不準伸入攪拌鍋內，以免發生意外。
4、發現機器有故障應立即停機，找**人員檢查。
5、攪拌完成后將料桶及攪拌葉拆下后清洗，涼干保存。
6、攪拌鍋拆，裝時一定要輕拿輕放，以免磕碰變形無法正常使用。
Notes on compressive strength mixer for masonry bricks:
1. Read the instructions carefully before use, and use them strictly in accordance with the operating procedures.
2. The grounding wire device must be connected before starting up, and A is removed at work to avoid electric shock.
3. When the machine is working, do not put your hａnd into the mixing pot to avoid accidents.
4. If the machine is found to be faulty, stop the machine immediately and ask the inspector for inspection.
5. After the stirring is completed, remove the bucket and the stirring leaves, wash them, and store them dry.
6. Disassemble the mixing pot. Be sure to handle it gently during installation to avoid bumping and deforming and preventing normal use.
會員1.png)
QQ:2568841715
