榮計達 輪廓標耐密封測量裝置參數LKB-MF
LKB-MF 面議縫前設備 縫制設備 縫制配件 整理設備 繡花機 內衣機械 服裝輔助設備 洗滌機械 二手服裝機械 其它服裝機械
上海榮計達儀器科技有限公司
會員1.png)
上海榮計達儀器科技有限公司
| 參 考 價 | 面議 |
產品型號STT-940
品 牌
廠商性質其他
所 在 地上海市
紡織服裝機械網采購部電話：0571-88918531
QQ:2568841715
聯系方式：查看聯系方式
更新時間：2023-10-15 12:17:47瀏覽次數：95次
聯系我時，請告知來自 紡織服裝機械網鋼構件鍍鋅層附著性能測定儀是檢測儀器，適用于公路用鋼構件鍍鋅層附著性能測檢驗使用。
鋼構件鍍鋅層附著性能測定儀是檢測儀器，適用于公路用鋼構件鍍鋅層附著性能測檢驗使用。使用前務必仔細閱讀說明書。并由**實驗人員操作，以避免操作不當引起的傷害。如需了解更多資料請與我公司客服人員聯系。
The tester for galvanized layer adhesion of steel members is a testing instrument, which is suitable for testing and inspection of galvanized layer adhesion of steel members for highways. Be sure to read the instructions carefully before use. It is operated by ** experimental personnel to avoid injury caused by improper operation. For more information, please contact our customer service staff.
鋼構件鍍鋅層附著性能測定儀適用于熱浸鍍鋅層附著力試驗，是利用錘頭自由跌落擊打試樣來測試鍍鋅層附著性能質量進行評價，產品符合JT/T684-2007《鋼構件鍍鋅層附著性能測定儀》、JT/T281-2007《高速公路波形梁鋼護欄》、JT/T374-1998《隔離柵技術條件》附錄中的技術指標，及GB/T2694-2010《輸電線路鐵塔制造技術條件》的落錘試驗方法。
The tester for the galvanized layer adhesion of steel members is suitable for the hot-dip galvanized layer adhesion test. It uses the hammer head to freely drop and hit the sample to evaluate the quality of galvanized layer adhesion. The product meets JT / T684-2007 "Steel The technical indicators in the appendix of the component galvanized layer adhesion performance tester, JT / T281-2007 "Highway Corrugated Beam Steel Guardrail", JT / T374-1998 "Isolation Bar Technical Specifications", and GB / T2694-2010 "Transmission Line "Technical conditions for manufacturing towers" drop hammer test method.
鋼構件鍍鋅層附著性能測定儀技術參數：
★錘頭采用45號鋼，質量為(210±10)g，表面鍍鉻。
★錘刃硬度(肖氏)不低于40HS。
★錘柄采用橡木，質量為(70±10)g。
★錘頭中間線至底座面垂直高度：300mm±1mm
★底座采用Q235鋼，尺寸為：250mm*250mm*15mm
★重量偏差：±1g，幾何尺寸偏差：±1mm。
★錘頭、錘柄及底座公稱尺寸及允許偏差
★構件名稱 公稱尺寸及允許偏差
★錘頭 L(mm) F(mm) c1(mm) a (°) 錘刃切面平整度(UM) 刃口寬度(mm)
100±2 60±1 20±1 90±1 ≤8 ≤0.1
★錘柄 A(mm) B(mm) C(mm) D(mm) Φ2 N(mm)
275±5 100±2 105±2 27±1 20±1 15°-1
★底座 E(mm) H(mm) G(mm) K(mm) M(mm)
25±1 30±1 15°±1 22±1 60±1
Technical parameters of galvanized coating adhesion tester for steel members:
★ The hammer head is made of 45 # steel with a mass of (210 ± 10) g and its surface is chrome-plated.
★ Hammer blade hardness (Shore) is not lower than 40HS.
★ The hammer handle is made of oak with a mass of (70 ± 10) g.
★ Vertical height from center line of hammer head to base surface: 300mm ± 1mm
★ The base is made of Q235 steel, the size is: 250mm * 250mm * 15mm
★ Weight deviation: ± 1g, geometric dimension deviation: ± 1mm.
★ Nominal size and allowable deviation of hammer head, hammer handle and base
★ Name of component Nominal size and allowable deviation
Hammer head L (mm) F (mm) c1 (mm) a (°) Flatness of hammer cutting surface (UM) Edge width (mm)
100 ± 2 60 ± 1 20 ± 1 90 ± 1 ≤8 ≤0.1
Hammer shank A (mm) B (mm) C (mm) D (mm) Φ2 N (mm)
275 ± 5 100 ± 2 105 ± 2 27 ± 1 20 ± 1 15 ° -1
Base E (mm) H (mm) G (mm) K (mm) M (mm)
25 ± 1 30 ± 1 15 ° ± 1 22 ± 1 60 ± 1
鋼構件鍍鋅層附著性能測定儀材料和質量：
★錘頭采用45號鋼，質量為(210±10)g，表面鍍鉻。
★錘刃硬度(肖氏)不低于40HS。
★錘柄采用橡木，質量為(70±10)g。
★底座采用Q235鋼，表面鍍鉻。
Material and quality of galvanized coating adhesion tester for steel members:
★ The hammer head is made of 45 # steel with a mass of (210 ± 10) g and its surface is chrome-plated.
★ Hammer blade hardness (Shore) is not lower than 40HS.
★ The hammer handle is made of oak with a mass of (70 ± 10) g.
★ The base is made of Q235 steel and the surface is chrome-plated.
您感興趣的產品PRODUCTS YOU ARE INTERESTED IN
紡織服裝機械網 設計制作，未經允許翻錄必究 .? ? ?
請輸入賬號
請輸入密碼
請輸驗證碼
