自動液壓車轍試驗成型機具有精度高，試驗過程傻瓜式操作，易學易用易維護等特點。整機系統由主機，嵌入式控制系統和PC機以及試驗軟件組成。主機的控制面板可以完成大部分的操作控制，使用更加便捷。PC機試驗軟件可以自動完成試驗，并記錄試驗結果，繪制形變曲線圖，自動保存實驗數據，打印試驗報表。

The automatic rutting forming test machine has the characteristics of high precision, foolproof operation in the test process, easy to learn, easy to use and easy to maintain. The whole system consists of a host computer, an embedded control system and a PC, and test software. The main control panel of the mainframe can perform most of the operation control and is more convenient to use. The PC test software can automatically complete the test, record the test results, draw the deformation curve, automatically save the experimental data, and print the test report.

自動液壓車轍試驗成型機基本原理和結構：

瀝青混合料的車轍試驗是試件在特定的溫度和荷載條件下，測定試驗輪往返行走所形成的車轍變形速率，以每產生1mm變形的行走次數（即動穩定度）表示。本車轍試驗儀采用試件固定，試驗輪運動的方法。試件被固定在恒溫槽(空間)，試驗輪在減速電機和曲軸連桿的拖動下，以每分鐘21次的速率來回往返。如圖所示：試驗輪以及荷重被安裝在光杠導軌上，被來回拖動。試驗輪碾壓試件，產生形變，位移傳感器檢測到微小的變形，這些變形數據及其試驗輪運動次數數據被傳輸給計算機，經過運算后，顯示成變形曲線。

試驗輪負重(壓強)出廠已經調整到0.7Mpa。根據試驗要求，荷重可以被調整。一個三相電動機被減速器調整為每分鐘21轉，拖動試驗輪每分鐘往返21次。

The basic principle and structure of the automatic rutting test machine:
The rutting test of the asphalt mixture is to determine the deformation rate of the rut formed by the test wheel moving back and forth under specific temperature and load conditions, and is expressed by the number of walking (ie, dynamic stability) per 1 mm deformation. The rutting tester uses a test piece to fix the test wheel movement method. The test piece was fixed in a constant temperature bath (space), and the test wheel was reciprocated back and forth at a rate of 21 times per minute under the drag of the geared motor and the crankshaft link. As shown in the figure: The test wheel and the load are mounted on the light bar guide and are dragged back and forth. The test wheel crushes the test piece to generate deformation, and the displacement sensor detects minute deformation. The deformation data and the data of the number of times of the test wheel movement are transmitted to the computer, and after the operation, the deformation curve is displayed.
The load weight (pressure) of the test wheel has been adjusted to 0.7Mpa. The load can be adjusted according to the test requirements. A three-phase motor was adjusted to 21 rpm by the reducer, and the test wheel was dragged 21 times per minute.

自動液壓車轍試驗成型機技術指標：

★三相四線380V±10%

★控制器：?jiǎn)蜗?/span>220V±10%

★加熱器功率：△接法，1KW×3

★電機功率：三相三線750W

★總功率：不大于4.2KW

★溫度測量范圍：0-100℃

★溫度分辨率：0.01℃

★溫度測量精度：初始精度±0.5℃ (固定點修正后為±0.05℃)

★控溫精度(相對于溫度測量點)：

★箱體溫度：45分鐘后為±0.2℃，60分鐘后為±0.05℃

★水槽溫度：30分鐘后為±0.5℃，45分鐘后為±0.2℃

★箱體不同位置溫差：60分鐘后，大溫差0.3℃

★位移傳感器測量范圍：0-25mm

★位移分辨率：0.001mm

★位移測量精度： 0.05mm

★輪碾往返速度：21次往返/min

★輪碾表面硬度：78±2

★輪碾載荷：0.7MPa±0.05MPa(出廠調校)

★外形尺寸：300X300X50mm

★凈重：300Kg

Automatic rut forming test machine technical indicators:
★Three-phase four-wire 380V±10%
★ Controller: single phase 220V ± 10%
★Heater power: △ connection method, 1KW × 3
★Motor power: three-phase three-wire 750W
★ Total power: no more than 4.2KW
★ Temperature measurement range: 0-100 ° C
★ Temperature resolution: 0.01 ° C
★ Temperature measurement accuracy: initial accuracy ± 0.5 ° C (± 0.05 ° C after fixed point correction)
★ Temperature control accuracy (relative to temperature measurement point):
★Box temperature: ±0.2°C after 45 minutes, ±0.05°C after 60 minutes
★Sink temperature: ±0.5°C after 30 minutes and ±0.2°C after 45 minutes
★The temperature difference between different positions of the cabinet: After 60 minutes, the large temperature difference is 0.3°C
★ Displacement sensor measurement range: 0-25mm
★ Displacement resolution: 0.001mm
★ Displacement measurement accuracy: 0.05mm
★ Round grinding speed: 21 round trips / min
★ Wheel grinding surface hardness: 78±2
★ Wheel crushing load: 0.7MPa±0.05MPa (factory adjustment)
★Dimensions: 300X300X50mm
★Net weight: 300Kg

自動液壓車轍試驗成型機功能和特點：

★帶氣流循環的自動控溫系統，內部帶恒溫水槽，可以做浸水車轍試驗。箱體控溫精度高達0.05℃。

★試驗輪氣壓自動升降系統，免除人工操作。

★便于拆卸的控制系統，維護更簡單。

★帶背景燈的輕觸式操控界面，完整的液晶顯示信息，試驗狀態一目了然。

★藍牙(Blue tooth)無線通訊，筆記本電腦可以遠離操作臺，更加安全。

★自動進行試驗，顯示曲線圖，數據自動存儲，計算動穩定度，報表打印輸出。

Automatic rut forming test machine features and features:
★Automatic temperature control system with air circulation, internal with constant temperature water tank, can be used for water immersion test. The cabinet temperature control accuracy is up to 0.05 °C.
★ Test wheel air pressure automatic lifting system, eliminating manual operation.
★ Easy to disassemble control system for easier maintenance.
★ Light touch control interface with backlight, complete LCD display information, test status at a glance.
★Bluetooth wireless communication, the laptop can be safer away from the console.
★ Automatic test, display graph, automatic data storage, calculation of dynamic stability, report printout.