国产一级a毛一级a看免费视频,久久久久久国产一级AV片,免费一级做a爰片久久毛片潮,国产精品女人精品久久久天天,99久久久无码国产精品免费了

上海榮計達儀器科技有限公司

當前位置：上海榮計達儀器科技有限公司>>瀝青實驗儀器>>蠟含量測定儀

蠟含量測定儀

返回列表頁

參考價

面議

具體成交價以合同協議為準

產品型號WSY-10

品牌

廠商性質其他

所在地上海市

在線詢價 收藏產品查看聯系電話

紡織服裝機械網采購部電話：0571-88918531QQ:2568841715

聯系方式：查看聯系方式

更新時間：2024-02-10 18:36:07瀏覽次數：144次

聯系我時，請告知來自紡織服裝機械網

產品分類 品牌分類

  瀝青實驗儀器

全部產品列表

暫無信息

上海榮計達儀器科技有限公司

經營模式：其他

商鋪產品：1006條

所在地區：

聯系人：王林

詢價 給他留言

產品簡介

蠟含量測定儀,瀝青實驗儀器

詳細介紹

瀝青蠟含量測定儀是**瀝青檢測儀器，用于裂解蒸餾法測定道路石油瀝青的蠟含量。符合中華人民共和國行業標準JTG E20-2011 <<公路工程瀝青及瀝青混合料試驗規程>>標準要求。用于裂解蒸餾法測定道路石油瀝青的蠟含量。

Asphalt wax content tester is a ** asphalt detection instrument used to determine the wax content of road petroleum asphalt by pyrolysis distillation method. It meets the requirements of the People's Republic of China industry standard JTG E20-2011 << Testing regulations for highway engineering asphalt and asphalt mixtures >> Used to determine the wax content of road petroleum asphalt by pyrolysis distillation.

WSY-10瀝青蠟含量測定儀技術參數：

★工作溫度：-25℃~+40℃

★水浴介質：乙醇

★水浴容積：300x300x280mm

★降溫平均速度：0.8℃/min

★控溫精度：±0.5℃

★制冷功率：1.5匹

★加熱功率：1KW

★降霜功率：100W

★電源：AC220V 50HZ

★外形尺寸：820X650X750mm

★重量：85kg

Technical parameters of WSY-10 asphalt wax content tester:

★ Working temperature: -25 ℃ ~ + 40 ℃

★ Water bath medium: ethanol

★ Water bath volume: 300x300x280mm

★ Cooling average speed: 0.8 ℃ / min

★ Temperature control accuracy: ± 0.5 ℃

★ Refrigeration power: 1.5HP

★ Heating power: 1KW

★ Defrost power: 100W

★ Power supply: AC220V 50HZ

★ Dimensions: 820X650X750mm

★ Weight: 85kg

瀝青蠟含量測定儀用途：

★本儀器設計小巧、精美，依方便實用而設計。

★儀器采用優質不銹鋼板制做，抗蝕性強。

★儀器冷浴上開有3個孔，可同時作3個樣，做對比樣，也可分別作樣。

★溫度控制器是本產品的控制核心，采用日本高精度溫控儀控溫，恒溫浴溫度的測量是通過PT100鑒定進行的。本傳感器反應靈敏，工作可靠，能迅速及時地反映其溫度的變化。溫控儀的輸出**是控制輸出，控制精度高，能夠保證在標準規定的誤差范圍內。

★冷浴后部安裝有新型節能照明燈，使操作者能夠清晰的觀察其試驗步驟。

★儀器采用進口壓縮機制冷，制冷迅速精度高。

★浴體采用透明玻璃材料制作,便于操作時透明觀察。

Asphalt wax content tester uses:

★ The instrument is small and exquisite in design, and is designed for convenience and practicality.

★ The instrument is made of high-quality stainless steel plate with strong corrosion resistance.

★ There are 3 holes in the cold bath of the instrument, and 3 samples can be made at the same time, for comparison, or for samples.

★ Temperature controller is the control core of this product. It adopts Japanese high-precision temperature controller to control the temperature. The temperature of the constant temperature bath is measured by PT100 appraisal. The sensor is sensitive and reliable, and can quickly and timely reflect changes in its temperature. The output of the temperature controller ** is a control output, with high control accuracy, which can guarantee within the error range specified by the standard.

★ A new energy-saving lighting is installed at the back of the cold bath, so that the operator can clearly observe its test steps.

★ The instrument adopts imported compressor for refrigeration, and the refrigeration is fast and accurate.

★ The bath body is made of transparent glass material, which is convenient for transparent observation during operation.

瀝青蠟含量測定儀注意事項：

★儀器采用單相交流220V電源，為確保操作安全，接地必須良好。

★儀器使用一段時間后，應檢查一次，以便發現問題，及時處理，保證儀器正常工作。

★儀器應置于通風良好的室內使用，應配有防塵罩。

★本機如果在一定時間內不準備使用時，應將防塵罩蓋上。

★玻璃配件屬易碎物品，請小心輕拿輕放！

★出廠時，已將溫控儀參數設定，如非其他要求，請不要更改設定參數，以免造成不必要的麻煩。

Note for asphalt wax content tester:

★ The instrument uses a single-phase AC 220V power supply. To ensure safe operation, the ground must be good.

★ After using the instrument for a period of time, it should be checked once in order to find problems and deal with them in time to ensure that the instrument works normally.

★ The instrument should be placed in a well-ventilated room and equipped with a dust cover.

★ If the machine is not going to be used for a certain period of time, the dust cover should be covered.

★ Glass accessories are fragile, please handle with care!

★ The parameters of the temperature controller have been set when leaving the factory. If it is not required, please do not change the set parameters to avoid unnecessary trouble.

以上信息由企業自行提供，信息內容的真實性、準確性和合法性由相關企業負責，紡織服裝機械網對此不承擔任何保證責任。溫馨提示：為規避購買風險，建議您在購買產品前務必確認供應商資質及產品質量。