瀝青粘韌性測定儀是根據**交通行業標準JTJ052《公路工程瀝青及瀝青混合料試驗規程》中T0624《瀝青粘韌性試驗》和石化行業標準SH/T0735《瀝青粘韌性試驗》的要求設計制造。本儀器兼容交通行業和石化行業兩個試驗標準的要求，拉伸長度可選擇300mm或610mm；拉伸試驗機采用高精度絲桿拉伸設計，運行平穩可靠，測量精度高；
Asphalt viscosity and toughness tester is designed and manufactured according to the requirements of T0624 "Asphalt Viscosity and Toughness Test" in the ** Transportation Industry Standard JTJ052 "Highway Engineering Asphalt and Asphalt Mixture Test Rules" and the petrochemical industry standard SH / T0735 "Asphalt Viscosity Test" This instrument is compatible with the requirements of the two test standards of the transportation industry and the petrochemical industry. The tensile length can be selected from 300mm or 610mm. The tensile testing machine adopts high-precision screw rod tensile design, which runs smoothly and reliably with high measurement accuracy.
瀝青粘韌性測定儀技術指標:
★拉伸速度： 500mm/min±10mm；
★大加載能力： 1000N；
★拉力非線性誤差： ＜0.5％；
★拉力采樣間隔： 0.5mm；
★大拉伸長度： 610mm；
★供電電源： AC220V±10％，50Hz；
★整機功耗： 不大于500W；
★外型尺寸： 520×400×1220mm
★重量：75kg
Asphalt viscosity and toughness tester technical indicators:
★ Stretching speed: 500mm / min ± 10mm;
★ Large loading capacity: 1000N;
★ Tensile non-linear error: <0.5%;
★ Sampling interval of pulling force: 0.5mm;
★ Large stretch length: 610mm;
★ Power supply: AC220V ± 10%, 50Hz;
★ Overall power consumption: not more than 500W;
★ External dimensions: 520 × 400 × 1220mm
★ Weight: 75kg
瀝青粘韌性測定儀操作規程：
★仔細閱讀使用說明書,了解和熟悉儀器的操作程序和操作要求.
★標準拉力檢測系統按上述方法連接好.
★將儀器按說明書所規定的要求接通電源,開機,使儀器處于正常的工作狀態.
★連接好計算機,安裝好本儀器配的操作軟件,使計算機處于正常運行狀態.
★設計好檢定程序和檢定點.
★利用操作面板上"上行檔"的"啟動"和"暫停"鍵作
Asphalt viscosity tester operating procedures:
Read the instruction manual carefully to understａnd and be familiar with the operating procedures and requirements of the instrument.
The standard tensile testing system is connected as described above.
Connect the instrument to the power supply according to the requirements specified in the instruction manual, and turn it on so that the instrument is in a normal working state.
Connect the computer and install the operating software of the instrument so that the computer is in a normal operating state.
Design the verification procedures and points well.
★ Using the "Start" and "Pause" keys of "Upshift" on the operation panel
瀝青粘韌性測定儀儀器成套：
★粘韌性試驗器 （含拉伸半球圓頭和定位支架組件、定位螺母、試樣容器各一件）
★計算機 （另配打印機一臺）
★串口通訊線
可選配件：
HWY-10多功循環恒溫水浴
Asphalt Viscosity Tester Instrument Set:
★ Visco toughness tester (including a tensile hemisphere round head and a positioning bracket assembly, a positioning nut and a sample container each)
★ Computer (with one printer)
★ Serial communication cable
Optional accessories:
HWY-10 multi-function circulating constant temperature water bath
會員1.png)
QQ:2568841715
