縫前設備 縫制設備 縫制配件 整理設備 繡花機 內衣機械 服裝輔助設備 洗滌機械 二手服裝機械 其它服裝機械
深圳市信瑞達電力設備有限公司
參 考 價 | 面議 |
產品型號
品 牌
廠商性質其他
所 在 地
紡織服裝機械網采購部電話:0571-88918531QQ:2568841715
聯系方式:查看聯系方式
更新時間:2023-11-25 09:18:35瀏覽次數:215次
聯系我時,請告知來自 紡織服裝機械網LFA-D50 系列開環型霍爾電流傳感器的初、次級之間是絕緣的,用于控制、測量直流、交流和脈沖電流。LFA-D50 series current sens...
LFA-D50 系列開環型霍爾電流傳感器的初、次級之間是絕緣的,用于控制、測量直流、交流和脈沖電流。
LFA-D50 series current sensor is a open loop device based on the measuring principle of the hall effect, with a galvanic isolation between primary and secondary circuit. It provides accurate electronic measurement of DC, AC or pulsed currents.
電參數 Electrical data(Ta=25℃±5℃,RL=2KΩ,CL=10000PF) |
型號 Type 參數 | LFA50D50 | LFA75D50 | LFA100D50 | LFA150D50 | LFA200D50 | LFA300D50 | 單位 Unit |
額定輸入電流(Ipn) | ±50 | ±75 | ±100 | ±150 | ±200 | ±300 | A |
測量電流范圍(Ip) | ±150 | ±150 | ±200 | ±300 | ±400 | ±450 | A |
額定輸出電壓 | @Ip=Ipn ±4±1% | V | |||||
電源電壓 | ±15±5% | V | |||||
功耗電流 Power Consumption | +18,-10 | mA | |||||
失調電壓 | ±30 | ±25 | mV | ||||
磁失調電壓 Magnetic offset voltage | ≤±25 | ≤±20 | mV | ||||
失調電壓溫漂 | ≤±1.5 | ≤±1.0 | mV/℃ | ||||
輸出電壓溫漂 | ≤±1.5 | ≤±1.0 | mV/℃ | ||||
線性度 | @Ip=0-±Ipn ≤1 | %FS | |||||
帶寬 Bandwidth | @ -3db DC…50 | KHz | |||||
跟隨精度 di/dt | 50 | A/uS | |||||
響應時間 | @50A/μS, 10%-90% ≤3 | μS | |||||
絕緣電壓 | @ 50HZ,AC,1min 2.5 | KV |
使用說明 Directions for use |
1. 產品箭頭的方向?yàn)?/span>Ip方向。
It will be in a forward direction when the Ip flows according to the direction of the arrowhead.
2. 初級導體溫度不應超過120℃。
The primary conductor should be≤120℃.
3. 母排充滿初級穿孔時動態表現(di/dt和響應時間)為。
The dynamic performance (di/dt and the response time)is the best when the primary hole is fully filled with the bus bar.
4. 當待測電流從傳感器穿過,即可在輸出端測得電壓大小。(注意:錯誤的接線可能導致傳感器損壞)
When the current will be measured goes through a sensor,the voltage will be measured at the output end.
(Note: The false wiring may result in the damage of the sensor)
5. 傳感器的輸出幅度可根據用戶需要進行適當調節。
Customs can adjustOutput amplitudeof the sensorby needs.
6. 可按用戶需求定制不同額定輸入電流和輸出電壓的傳感器。
Custom design in the different rated input current and the output voltage are available.
|
l UL94-V0.
l EN60947-1:2004
l IEC60950-1:2001
l EN50178:1998
SJ 20790-2000
總體參數 General date |
| 數值 Value | 單位 Unit | 符號 Symbol |
工作溫度 Operating temperature | -40 to +85 | oC | TA |
儲存溫度 Storage temperature | -40~+125 | oC | TS |
毛重(約)Mass(approx) | 23 | g | M |
特性圖Characteristics chart |
脈沖電流信號響應特性 抗脈沖電壓干擾特性
Pulse current signal response characteristicEffects of impulse noise
應用 Applications |
l 變頻調速系統
Variable speed drives
l 電焊機
Welding machine
l 通訊電源
Battery supplied applications
l 不間斷電源UPS
Uninterruptible Power Supplies (UPS)
l 電化學
Electrochemical
結構參數 Mechanical dimension(for reference only) |
Remarks:
1. All dimensions are in mm.
2. General tolerance ±1mm
您感興趣的產品PRODUCTS YOU ARE INTERESTED IN
紡織服裝機械網 設計制作,未經允許翻錄必究 .? ? ?
請輸入賬號
請輸入密碼
請輸驗證碼
請輸入你感興趣的產品
請簡單描述您的需求
請選擇省份
聯系方式
深圳市信瑞達電力設備有限公司